Intensive demonstration & introduction of the software WinOLS + Map editing PETROL

Correct use of the program WinOLS

Logic and strategy of the function of the ECU – Petrol Engines (including the use of the SW program WinOLS)

This training is dedicated to all those who want to delve into the issues of petrol/turbo petrol engines, even with LPG plants and CNG (methane) – (ME7.xx – ME9.xx – MED9.xx – MED17.xx etc …)

The ECU families Bosch, Siemens and Marelli will be taken “under the loupe” and eventual other systems on request.

The first two days of the training are identical to the intensive demonstration and introduction of the software WinOLS, in order to acquire the basic knowledge of the function of the electronic control units and the structure of the maps.

Training Program

• Functions inside the ECU


• Logic of transmission of information from the sensor to the actuator


• The Eprom memories


• Serial and conventional modification


• Checksum (linear and algorithm)


• Structure of the maps


• Identification of the maps and their position


• Creation of the own Map-Pack


• Map Correction


• Torque Limiter


• Techniques for remapping of petrol engines


• Families Bosch ME7 .xx – ME9.xx – MED9.xx – MED17.xx etc….


• Families Siemens & Marelli


• BDM Interface


• OBDII programming


• Eventual practical exercises


• Indications for the products actually available on the market

This course is only for license holders of the software "WinOLS."

You will receive the exact content sequence after booking the course.

The registration deadline is February 10, 2025

The course takes place for groups of 3 or more people.

Intensive demonstration & introduction of the software WinOLS + Map editing DIESEL
Correct use of the program WinOLS

This course is only for license holders of the software "WinOLS."

In this course, only the correct use of the program WinOLS is explained, like the commands and the associated logic.

• General introduction WinOLS


• Classification of maps


• Map pack creation


• Duplication projects


• Importfunctions (Damos, .frf. .a2l)


• Export and many other important functions


• Automatic and manual map detection 


• Mathematical principles of calculation

You will receive the exact content flow after the booking of the course.

The registration deadline is February 6th, 2025

The course takes place from 3 persons.

Intensive demonstration & introduction of the software WinOLS + Map editing PETROL

Correct use of the program WinOLS

Logic and strategy of the function of the ECU – Petrol Engines (including the use of the SW program WinOLS)

This training is dedicated to all those who want to delve into the issues of petrol/turbo petrol engines, even with LPG plants and CNG (methane) – (ME7.xx – ME9.xx – MED9.xx – MED17.xx etc …)

The ECU families Bosch, Siemens and Marelli will be taken “under the loupe” and eventual other systems on request.

The first two days of the training are identical to the intensive demonstration and introduction of the software WinOLS, in order to acquire the basic knowledge of the function of the electronic control units and the structure of the maps.

Training Program

• Functions inside the ECU


• Logic of transmission of information from the sensor to the actuator


• The Eprom memories


• Serial and conventional modification


• Checksum (linear and algorithm)


• Structure of the maps


• Identification of the maps and their position


• Creation of the own Map-Pack


• Map Correction


• Torque Limiter


• Techniques for remapping of petrol engines


• Families Bosch ME7 .xx – ME9.xx – MED9.xx – MED17.xx etc….


• Families Siemens & Marelli


• BDM Interface


• OBDII programming


• Eventual practical exercises


• Indications for the products actually available on the market

This course is only for license holders of the software "WinOLS."

You will receive the exact content sequence after booking the course.

The registration deadline is January 28, 2025

The course takes place for groups of 3 or more people.

Intensive demonstration & introduction of the software WinOLS + Map editing DIESEL
Correct use of the program WinOLS

This course is only for license holders of the software "WinOLS."

In this course, only the correct use of the program WinOLS is explained, like the commands and the associated logic.

• General introduction WinOLS


• Classification of maps


• Map pack creation


• Duplication projects


• Importfunctions (Damos, .frf. .a2l)


• Export and many other important functions


• Automatic and manual map detection 


• Mathematical principles of calculation

You will receive the exact content flow after the booking of the course.

The registration deadline is January 6th, 2025

The course takes place from 3 persons.

Intensive demonstration & introduction of the software WinOLS + Map editing DIESEL
Correct use of the program WinOLS

This course is only for license holders of the software "WinOLS."

In this course, only the correct use of the program WinOLS is explained, like the commands and the associated logic.

• General introduction WinOLS


• Classification of maps


• Map pack creation


• Duplication projects


• Importfunctions (Damos, .frf. .a2l)


• Export and many other important functions


• Automatic and manual map detection 


• Mathematical principles of calculation

You will receive the exact content flow after the booking of the course.

The course takes place from 3 persons.

Intensive demonstration & introduction of the software WinOLS + Map editing DIESEL
Correct use of the program WinOLS

This course is only for license holders of the software "WinOLS."

In this course, only the correct use of the program WinOLS is explained, like the commands and the associated logic.

• General introduction WinOLS


• Classification of maps


• Map pack creation


• Duplication projects


• Importfunctions (Damos, .frf. .a2l)


• Export and many other important functions


• Automatic and manual map detection 


• Mathematical principles of calculation

You will receive the exact content flow after the booking of the course.

Registration closes on November 01th,2024

The course takes place from 3 persons.

Intensive demonstration & introduction of the software WinOLS + Map editing DIESEL
Correct use of the program WinOLS

This course is only for license holders of the software "WinOLS."

In this course, only the correct use of the program WinOLS is explained, like the commands and the associated logic.

• General introduction WinOLS


• Classification of maps


• Map pack creation


• Duplication projects


• Importfunctions (Damos, .frf. .a2l)


• Export and many other important functions


• Automatic and manual map detection 


• Mathematical principles of calculation

You will receive the exact content flow after the booking of the course.

Registration closes on September 01st,2024

The course takes place from 3 persons.